High-Density Polyethylene Film

Thanks to its lightweight structure and ease of use, transporting and storing materials becomes significantly more advantageous compared to alternative materials. Plastic films form a thin and flexible layer that protects organic substances within the packaging. With their low permeability, high transparency and smooth surface quality, they are among the most preferred and prestigious packaging materials.

7000 F

PROPERTIES TYPICAL VALUES UNITS TEST METHODS
POLYMER PROPERTIES (1)
Melt Flow Rate (MFR) at 190°C and 5 kg load 0.04 g/10 min ISO 1133
Density at 23°C (1) 952 kg/m³ ISO 1183
MECHANICAL PROPERTIES (2)
Tensile Stress at Yield 27 MPa ISO 527-1/-2
Tensile Stress at Break >24 MPa ISO 527-1/-2
Elongation at Break >500 % ISO 527-1/-2
Charpy Impact Strength NB kJ/m² ISO 179-1
Shore Hardness 64 D scale ISO 868
Stress Cracking Resistance >600 Hr ASTM 1693
Vicat Softening Temperature 131 °C ISO 11357
Melting Temperature 124 °C ISO 306

(1) Typical values; not to be construed as specification limits.
(2) Based on compression molded sheet. Test specimen conditioned at 23°C, 50% RH for 24 hours according to ISO 1872-2.

WhatsApp